집 > 제품 > 전기 절연 슬리브 >

1KV 내후성 저전압 수축 튜브 터미네이션 키트

1KV Heat Shrink Termination Kit

Heat Shrink Termination Kit Weather Resistant

Weather Resistant Low Voltage Termination Kit

원래 장소:

심천, 광둥, 중국

브랜드 이름:

XingQi

지금 챗팅하세요

조회를 요청하다

제품 상세정보

이름:

1KV저전압 열수축 종단 키트/열수축 직선 조인트 키트

설치:

쉽고 빠른 전원 켜기

서비스:

긴 수명, UV 및 내후성

안정적인 보관:

긴 저장 수명

기갑/비장갑 옵션:

높은 호환성

강조하다:

1KV Heat Shrink Termination Kit

Heat Shrink Termination Kit Weather Resistant

Weather Resistant Low Voltage Termination Kit

지불과 운송 용어

포장 세부 사항

판지, 귀하의 요구에 따라 사용자 정의할 수 있습니다.

배달 시간

3-5 영업일

지불 조건

티/티

Product Introduction

Shelf Life and Storage:
The 1kV heat‑shrink termination & straight joint kits feature long shelf life. Store in an environment with temperature ranging from ‑10 ℃ to 40 ℃ and relative humidity below 75%.

Performance Features:

High mechanical strength
Compatible with a wide range of cable cross‑sections
Compact and simple design
Excellent UV resistance and weather resistance
Energization is permitted immediately after installation
Easy and simple installation

Shelf‑Life & Storage

Product: 1kV Heat‑Shrink Termination / Straight Joint Kits

Long shelf‑life

Storage condition: ‑10℃ ~ 40℃, relative humidity less than 75%

Product Features

High mechanical strength

Suitable for various cable cross‑sections

Compact design

Excellent UV resistance and weather‑aging performance

Power‑on available immediately after installation

Easy and simple installation

Selection Table for 0.6/1.0kV 4‑Core Heat‑Shrink Cable Intermediate Joints

Product Name	Model Specification	Cable Cross‑section (mm²)
4‑Core Intermediate Joint	XQ‑1/4.0	10‑16
4‑Core Intermediate Joint	XQ‑1/4.1	25‑50
4‑Core Intermediate Joint	XQ‑1/4.2	70‑120
4‑Core Intermediate Joint	XQ‑1/4.3	150‑240
4‑Core Intermediate Joint	XQ‑1/4.4	300‑500

The above quotation excludes hardware fittings and grounding wires.

0.6/1.0kV 4‑Core Heat‑Shrink Cable Straight Joint Selection — Multi‑Core Non‑Armored

Standard Kit Contents

Medium‑wall heat‑shrink tube with adhesive

Waterproof sealing tape

PVC tape

Gauze strip

Protective gloves

Cleaning kit

Cleaning wipe

0.6/1.0kV 4‑Core Heat‑Shrink Cable Straight Joint Selection — Multi‑Core Armored

Medium‑wall heat‑shrink tube with adhesive

Waterproof sealing tape

PVC tape

Gauze strip

Grounding wire

Constant force spring

Cleaning kit

Cleaning wipe

Protective gloves

0.6/1.0kV 4‑Core Heat‑Shrink Cable Straight Joint Installation — Multi‑Core Non‑Armored

Step 1: Prepare the complete set of heat‑shrink tubes

Step 2: Prepare crimping tools (mechanical type, hydraulic type)

Step 3: Cable insulation length (measure and mark crimping length)

Step 4: Strip cable insulation (according to terminal size)

Step 5: Slide on the large heat‑shrink outer sheath tube

Step 6: Slide on the small heat‑shrink tube

Step 7: Fit terminals and complete crimping

Step 8: Slide on small heat‑shrink tubes and heat each until tightly wrapped around cables

Step 9: Slide on the large heat‑shrink tube and heat until tightly wrapped around cables

0.6/1.0kV 4-Core Heat-Shrink Cable Straight Joint Installation — Multi-Core Armored

Step 1: Prepare the complete set of heat-shrink tubes

Step 2: Prepare crimping tools (mechanical and hydraulic type)

Step 3: Measure and mark the crimping length of cable insulation

Step 4: Strip the cable insulation according to the terminal size

Step 5: Slide on the large heat-shrink outer sheath tube

Step 6: Slide on the small heat-shrink tube

Step 7: Install and crimp the cable terminals firmly

Step 8: Slide on the small heat-shrink tubes and heat until tightly fitted to the cable

Step 9: Fix both ends of the grounding wire with constant force springs

Step 10: Slide on the large heat-shrink tube and heat until tightly fitted to the cable

태그：

전기 단열 튜브

케이블 절연 슬리브

폴리이미드 튜브

고온 폴리마이드 튜브 화학 저항 전기 단열 튜브 얇은 벽

지금 챗팅하세요

저전압 열 수축 수직 관절 방수 밀폐 XLPE 케이블 종료 노화 저항

지금 챗팅하세요

Outdoor Medium Voltage Cable Termination 35kV Cold Shrink Termination Kit UV Resistant

지금 챗팅하세요

직접적으로 당신의 조사를 우리에게 보내세요